Thrasher Foundation Repair Before & After Photos

This customer reached out to us because an inspector told him he needed to have his crawlspace looked at when he purchased the house.

When we came out to do an inspection, we found the humidity levels were extremely high due to the exposed soil in his crawlspace. The soil was allowing water vapor to release into the organic wood material in the flooring system above.

To fix this, we installed the CleanSpace Vapor Barrier to protect the crawlspace from releasing moisture and reaching the floors. The vapor barrier isolates the home from the earth, providing a layer of protection for moisture and undesirable humidity that comes with it.

This homeowner wanted to fix his concrete before they built a new deck and landscaped around the area.

During our inspection, we determined the driveway slabs had settled due to soil washout. To fix this issue, we did our Concrete Protection Three System on the whole driveway area. This includes PolyLevel to lift the slab to its original position, Nexus to seal cracks and joints, and SealantPro to protect the surface of the driveway from moisture.

The customer was happy with the project and is excited to start on their new deck.

This customer had sunken concrete. Our team at Thrasher Foundation Repair visited the property and determined the best solution would to use PolyLevel to lift, level, and fill the voids in the soil beneath the slab. And then use NexusPro to seal any cracks and joints. 

The customer was happy with the results and glad that there is now no more tripping hazards!

This homeowner wanted to protect their home to maintain its value. They know this is their retirement home, so they must keep it in good shape for their future. Since they've worked with Thrasher in the past on other homes, they knew they could trust us to get the job done right. 

Dillon Gubbels was the one to perform the inspection. He found that the house had wall failure along the back wall's foundation. This was causing separation cracks on their interior drywall. The soil outside their home was driving this problem and the pressure is applied to their foundation.

We fixed this by installing our wall support solution, Geo Anchors. The anchors were the ideal solution to be the least intrusive on their finished interior while stabilizing their foundation.

The customer was happy with the results and even said, "Thrasher is a company that stands behind their work."

This customer had mold growing in the basement of his business. The mold was growing in a dirt portion of his basement. In an effort to fix this issue, the customer had a dehumidifer installed by a local HVAC company last year. But the mold was still thriving. That's when he decided to contact Midwest - to get rid of the mold and ensure the air is clean in his store for his employees and customers.

Brock Scott, a System Design Specialist at Midwest, went to the property to inspect. He found that the dirt floor wasn't preventing ground water seepage increasing the humidity of the area. And that dirt was growing mold from such a high humidity.

To fix this, we encapsulated the basement, similar to how we would a crawl space, to protect the air above it. We also installed drain lines and sumps to drain any surface water under the liner. And lastly, the crew also used a Sedona to dry the air while they were working since the area had 87% humidity at one point.

The customer was happy that his store is now safe for his customers and employees.