Thrasher Foundation Repair Before & After Photos

Craig W. wanted to repair and protect his driveway before the sinking and cracking he was noticing got worse. To do this, we used a 3-part concrete protection solution that started with lifting and leveling his sinking slabs. Next we sealed the joints between the slabs to prevent water from seeping beneath the slabs where it could erode away the supporting soil. Next, we applied a concrete sealant over the driveway to protect it from the normal wear and tear that chips away at concrete and shortens its lifespan. We also installed an expansion joint to relieve pressure between the street and the driveway slabs to prevent future cracking. Craig was very happy with the results, and felt good knowing that his driveway would be protected in the years ahead.

Geoff D. wanted to sell his home someday, but first he had to resolve a water problem in his basement. Before he could replace the ruined carpet and drywall, we needed someone to help him keep the basement dry - someone who would stand behind their work for the years ahead. That's why he called Thrasher Foundation Repair.

We installed our Waterguard drainage system around the perimeter of the basement to capture and direct any water to the sump pump. Cleanspace vapor barrier was also installed along the basement walls to prevent water from coming into contact with drywall, keeping the space clean, dry and safe.

Lawrence R., in Lee’s Summit, MO, was frustrated with the appearance of his driveway, and the cracks had become tripping hazards over time. He was familiar with our reputation and trusted that we would provide a permanent solution. After meeting with our System Design Specialist Sam Pretz, he instantly knew our process and repair solutions were the best for his home.

Our crews arrived at the home in Lee’s Summit and installed our 2-part concrete protection system. It began by injecting our Polylevel foam beneath the concrete’s surface to lift, level, and stabilize the settled areas. Then, our NexusPro joint sealer is applied to all cracks and control joints to prevent any water from causing damage in the future and give the driveway a flush, clean appearance.

This family noticed that their driveway concrete slabs were sinking, cracking and getting worse. Beneath their driveway, water from rain and melting snow was gradually washing away the soil that supported the concrete slabs, allowing them to sink into voids and crack under its own weight. Fortunately the homeowners called Thrasher while the problem could still be repaired, and we injected Polylevel polyurethane foam beneath the slabs to lift, level and provide the necessary support. Now the homeowners have the peace of mind that comes from knowing their concrete won't be hurting their curb appeal.

Darrin M. in Burwell, NE, was frustrated with the settling of his front doorstep. After years of water infiltration in our Midwest climate, it’s common for steps like these to separate and begin to fail. Looking for a permanent solution, Darrin gave Thrasher a call to have one of our System Design Specialists come out and inspect the problematic area.

Brandon Headrick, our System Design Specialist, arrived at the home in Burwell, NE, and noticed that the front step had sunk and the sidewalk and walkway leading to the front door. The customer opted to have Thrasher install our 2-part concrete protection system to lift, level, and seal the sunken areas. Our PolyLevel foam was installed first to lift and level the sunken areas and then sealed with the NexusPro to prevent any water from infiltrating in the future.

Darrin was thrilled with his entire Thrasher experience and gave us a rewarding review! His concrete was in great shape, but the sunken areas created an eyesore and a potential tripping hazard. We were able to restore his peace of mind and install the permanent solution his concrete needed.