Thrasher Foundation Repair Before & After Photos

This homeowner was struggling with moisture coming through her foundation walls in her basement. She knew that the longer this problem continued, the more problems it would cause to her home, so she decided to give us a call due to our different waterproofing and encapsulation solutions.

We sent System Design Specialist James Denning to inspect the basement walls and determine what had been causing the moisture to leak through the foundation, as well as suggest a comprehensive solution to solve this homeowner's moisture problem. James found that moisture was coming through the walls due to no proper system to control the moisture or air quality in the basement. After discovering this, James suggested the solutions of encapsulation to prevent moisture from getting in the basement, and the homeowner loved the idea. We sent one of our installation teams to install WaterGuard Interior Drainage System and CleanSpace Vapor Barrier all around the basement to effectively encapsulate and properly drain any water that could be in the basement.

The homeowner was very happy to know that she could finish the basement without worrying about moisture problems on her walls. Check our the newly waterproofed and encapsulated basement!

This homeowner was struggling because his driveway was pushing against his garage floor, making both his garage floor and his driveway uneven. He was worried that he would have to completely replace his driveway concrete, but he wanted an expert opinion before he found someone to replace the concrete, so he gave us a call.

We sent System Design Specialist James Denning to inspect the driveway and determine what solution would be better than replacing the driveway's concrete. James found that street creep was effecting the driveway as it was putting pressure on the garage floor and eventually this would expand to pressure on the foundation. While this problem was concerning to the homeowner, James explained a custom solution that would prevent street creep from hurting the home. Our installation team came out to the home and got to work first on using PolyLevel foam and NexusPro sealant to lift, level, and seal the driveway to restore the driveway from the pressure that was against it. After that, our team installed Compression Guard to act as a buffer between the driveway and the street, ensuring that the driveway was safe from the street pressuring it in the future.

The homeowner was very happy with these solutions, especially since he thought that he was going to spend thousands of dollars on completely replacing his concrete, just for the same problem to happen again. Check out the driveway transformation!

These homeowners recently moved into their new home. After being at the home for a couple of months, they noticed some cracks starting in the walls as well as the floor started sagging. They were concerned about maintaining the property value of their home, and they decided that it needed to be fixed. One of their family members had recommended our services a few months ago after they had some work done, so these homeowners decided to give us a call.

We sent System Design Specialist Nick Tiberghien to inspect the floor and wall problem, determine why this was happening, and give a comprehensive solution that would solve these homeowners problems. Nick found that the sagging floors were happening due to a support column sinking directly underneath the home; He also found that the problems were getting worse overtime because there was high humidity in the home's crawlspace which was weakening the support column. After discussing this with the homeowners, Nick reassured them that the floors could be fixed and that one of our installation teams could be there soon to help. When the homeowner's appointment time came around, our installation team came in with our SmartJack System which is used to stabilize and raise the floors up.

The homeowners were so excited to have the installation team fix their floor problem. They said that the floors look and feel a lot better. Check out these homeowner's newly supported support beam in their crawlspace!

This homeowner wanted their back patio and AC area fixed because water had started pooling around their home recently, and this was a very concerning problem for their home's foundation. They read our reviews as well as watching our commercials online, and they decided that we had just the solutions to help them fix their concrete problem.

We sent System Design Specialist Daniel Capul to inspect the concrete problems and determine what solutions we could use for the patio. Daniel found that the concrete was not only causing water to pool around the home's foundation, but it was also a huge tripping hazard because of how uneven it was. After the inspection, Daniel discussed a custom solution with the homeowner that would help lift, level, and seal the concrete in order to eliminate the tripping hazard and stop water from pooling around the home's foundation. Our installation team used this custom plan and used PolyLevel foam and NexusPro sealant to lift, level, and seal the patio so that everyone could use it with ease.

The homeowner was extremely happy with their newly restored patio concrete. Check out the patio transformation. 

The sidewalk next to this homeowner's property was unsightly and it frustrated the homeowner. The homeowner knew that the sidewalk was creating a gap between her foundation and the concrete, and that water could start running down the foundation wall. She didn't want this to happen, so she decided to give us a call because we wouldn't tear up her concrete and we would be a minimal inconvenience to her.

We had our System Design Specialist Chris Holmes head out to this home to inspect the concrete problem and determine what solutions would best fix the concrete permanently. Chris found that the dirt underneath the concrete had been washed away, causing the sidewalk to rotate away from the home, which left the gap between the foundation wall and the sidewalk. After discussing the least invasive solutions with the homeowner, Chris got to work on getting an installation appointment started for this homeowner to have her problem fixed. Our installation team used PolyLevel foam and NexusPro sealant to create a solid base for the concrete after it was rotated back towards its original position as well as seal the concrete so that it would not have movement problems again.

The homeowner loved how quick and easy it was for our installation team to solve. She was thrilled that there was no mess to clean up and that it only took one day to complete the project. Check out her newly lifted sidewalk!