Thrasher Foundation Repair Before & After Photos

This homeowner was tired of hitting the joints on the concrete while removing snow in the winter. He wanted his driveway to look nice and be easy to shovel for the coming winter, so he decided to give us a call regarding his concrete.

We sent System Design Specialist Luke Miller to inspect the concrete joints an determine where we could help to smooth the concrete. Luke noticed that a couple sections of the driveway had settled slightly, causing a lip that would catch a snow blower or shovel, and also cause a tripping hazard down the road. After discussing this issue with the homeowner, they went ahead and scheduled an installation appointment to get the homeowner's concrete fixed. One of our concrete installation teams came to this home and lifted the settled slabs using PolyLevel foam. The team was able to bring the concrete back to its original location and keep it stabilized. Next, our team sealed the cracks and joints of the concrete using NexusPro sealant to ensure that the driveway looked nice, and to also prevent water or any other material from getting caught in the concrete's joints and cracks. 

The homeowner was very excited with the way that his concrete turned out and he really liked to see it level again. Check out this homeowner's newly leveled concrete!

This homeowner previously had wall support serviced by us, and she wanted to improve the support in her basement once again. She was getting her floors redone upstairs, but she was afraid that the floors had began to sag over the years in her home. She wanted her floors to be level and secure for when she redid them, so she gave us a call for addition support in her basement.

We had our Service Technician Joe Rebik inspect the floors to and determine where additional support was needed. Joe found that there was no support for the flooring, only the wall supports that one of our teams had installed previously. This would be concerning, however the homeowner found the problem before anything worse could have happened. She wanted Joe to fix this problem quickly, so Joe set up another installation appointment for the homeowner. Soon, our installation team came out and installed 2 supplemental beams as well as 4 SmartJacks to lift and stabilize the floors.

The homeowner was happy to have solid floors to walk on now. She is so excited to start remodeling her floors soon. Check out her newly supported floors!

This homeowner was concerned because there were tripping hazards and damage to his concrete. He knew that the needed to get this fixed so that he didn't need to replace his entire concrete late down the line. He wanted to have this fixed with the best products and he knew we would do the best installation with the best products, so he gave us a call.

We sent System Design Specialist Sam Frei to inspect the concrete and determine where the tripping hazards were and what caused them. Sam found that the tripping hazards were caused by concrete sinking at the end of the driveway; this problem also lead to the cracking concrete surface. After discussing options with the homeowner, they made an installation appointment for the next week. Our installation team used PolyLevel foam to lift and level the concrete, then they used NexusPro sealant to seal the cracked and joints of the concrete.

The homeowner was excited with the results and thought that it looked incredible when the crew was finished. Check out the concrete transformation!

This homeowner was struggling with water in his basement, so he called us out for basement waterproofing. The basement was waterproofed using WaterGuard and CleanSpace, but not before the home had been damaged by the water problems of the past. We were able to install PowerBraces and GeoLock Anchos to save the falling walls in addition to the waterproofing materials used. 

A few months later, the homeowner was concerned because his concrete was sloping towards the foundation walls, and the concrete was cracked which allowed water to seep into the soil next to the foundation. He was worried that the concrete would start to damage the parts of his foundation that were not previously damaged, so he decided to give us a call.

We sent System Design Specialist Ian Pfister to inspect the concrete cracks and determine if these would hurt the foundation that had no previous damage. Ian found that the concrete cracks were leading water to the nondamaged portion of the foundation. One of our concrete repair teams utilized NexusPro sealant to seal the cracks and joints to prevent any damage to his other foundation walls.

The homeowner was very happy with the work that was done and he is relieved to have his home safe from water damage. Check out the homeowner's fixed concrete!

This homeowner was upset with her driveway because the tripping hazards and large cracks on her concrete were an eye sore. She wanted to solve this problem, so after talking to people in the community, she knew that we would be the best people to help her get her driveway back into a good condition. 

We sent System Design Specialist Elliot Christians to inspect the driveway and determine what was causing the problems with her concrete. Elliot found that the homeowner's driveway was suffering because of street creep putting pressure on the concrete and pushing it towards the foundation. As this problem would continue to progress without any solutions, the homeowner knew that she needed to have her driveway fixed quickly, so she scheduled an installation appointment with one of our teams. That installation team used our 2-part Concrete Protection System included PolyLevel foam and NexusPro sealant to lift, level, and seal the driveway. The team also installed Compression Guard to act as a buffer between the street and the driveway to prevent street creep from continuing. 

The homeowner was so happy to have a driveway that she could be proud of again. She even wanted to use our services for waterproofing in the future. Check out her newly restored driveway!