Thrasher Foundation Repair Before & After Photos

This homeowner wanted to fix their cracked driveway before putting their home on the market. When we performed the inspection, we found that the front driveway slabs and back patio were settling really badly. This can occur for three reasons:

1. The soil was poorly compacted when the home was built.
2. Water was entering through the broken control joints and washing out the soil. 
3. The soil dried out underneath the slabs and created voids. When this happens, the slabs loose the support from the soil and sink into the voids.

Luckily, we have solutions to fix these issues. To lift and level the concrete, we used PolyLevel, a polyurethane foam that's injected underneath the slab that will compact the soil underneath and fill the void space. And for the control joints and cracks, we used NexusPro Joint Sealant to seal the concrete and keep water from penetrating the surface.

This homeowner wanted to remove trip hazards and make her walkways look better. Her concrete walkway was sinking and settling, which was an eyesore on the front of their home. When we inspected, we found that the soil below the sidewalk had washed out, which was causing the concrete to drop into the voids. To fix, we lifted and leveled the sidewalk with PolyLevel, a foam that is injected to stabilize the concrete. Next, we used NexusPro to seal all the cracks and joints to prevent water from entering and washing out the soil again.

This customer was one of the 60% of Americans facing water problems in their basement. Unfortunately, water was also the reason the basement walls began to crumble too. 

To fix this, we installed CleanSpace, which is a 100% waterproof plastic vapor barrier. To address the failing foundation walls, we installed EverBrace beams which are made of Zink-coated steel.

Both of these solutions also came with a 25-year warranty!

This homeowner was dealing with a repetitively sinking compression guard, creating a trip hazard. The fix the sinking concrete slabs, we used PolyLevel, an injectable foam, to lift the driveway back to its original position. After the PolyLevel, we re-set the compression guard. 

This homeowner wanted to avoid replacing their concrete and find a different solution to fix their cracked driveway. After inspection, we determined the best solution would be to use our three part concrete protection system. This protection system includes PolyLevel to lift and level the slab back to its original position, NexusPro to fill in cracks and joints, and then top it off with SealantPro, to seal and prevent further water intrusion.