Thrasher Foundation Repair Before & After Photos

This homeowner was getting moisture in her basement, so she wanted us to come out and look at her foundation. Her home doesn't have gutters, she didn't think she needed them because of the large overhang she has on her home. Turn out she did need them, moisture was still making its way down the side of the home, causing two sides to settle. To stabilize the home's foundation, we installed nine interior piers. 

This homeowner was worried about his concrete stairs and driveway sinking. He wanted the problem fixed but didn't want to have to replace the concrete. Luckily, he didn't have to! We lifted the sinking concrete with PolyLevel expanding foam and sealed the cracks and joints with NexusPro. 

This customer wanted the pads in front of his garage doors to be lifted. The main reason the pads were settling was because of washout. This was an urgent project because if we waited much longer the cost to repair would increase. We lifted and stabilized the concrete pads using PolyLevel, one pad had to be lifted 3 inches! We finished up by using NexusPro to seal all the joints and cracks. 

This customer realized that one of his walls started pulling away from his house and was worried that the problem was going to cause extensive damage to the house. We discovered that settlement combined with the way the wing wall was built caused the wall to pull from the house. This issue also compromised the home's second-level deck. We stabilized this home's foundation by installing five push piers at the corner of the home. Our push pier installation is non-disruptive, can lift the foundation back to its original position, and it has a 25-year warranty! 

These homeowners wanted to refinish their basement, but their bowing basement walls were stopping them. The problem was that they had top shear on one of their foundation walls and hydrostatic pressure from the soil on the outside of the walls. Our team fixed these problems by installing PowerBraces on the "problem" wall. We decided to use PowerBrace because the walls were poured and the deflection wasn't to the point of requiring another fix. Now the wall is stable and these homeowners can start their refinishing project!b